EMRFD Message Archive 7406

Message Date From Subject
7406 2012-04-13 23:30:22 Vincenzo Calandra Roy RX
Hi all,

Wes and gang, at chapter 12.7 of my EMRFD describe a general dc rx
module, with some attractive frills like low-pass filter, mute and
sidetone.

At page 12.2 fig. is showed (figs 12.43 and 12.44) the circuit board of
this receiver.

Any one have a reproducible master, and send it to me?

Thanks in advance for any reply.

My best regards.
--
Vincenzo Calandra IZ5GVP <vcalandra@libero.it>


[Non-text portions of this message have been removed]
7407 2012-04-14 00:49:29 clynton yarter Re: Roy RX
it is on page 12.32 and shows both sides of a single sided pcb. Top shows parts placement. I have a buddy with a good scanner and I will try to have him copy it tommorrow. So much for friday 13th. There are not a lot of traces. you might want to build this oakland ugly style. ( with parts on one side and traces or wires on the other.) Say le vie. Sincerely Clynton Yarter, KI6UMT Extra/VEcpyarter@live.com
To: emrfd@yahoogroups.com
From: iz5gvp@gmail.com
Date: Sat, 14 Apr 2012 08:30:19 +0200
Subject: [emrfd] Roy RX


























Hi all,



Wes and gang, at chapter 12.7 of my EMRFD describe a general dc rx

module, with some attractive frills like low-pass filter, mute and

sidetone.



At page 12.2 fig. is showed (figs 12.43 and 12.44) the circuit board of

this receiver.



Any one have a reproducible master, and send it to me?



Thanks in advance for any reply.



My best regards.

--

Vincenzo Calandra IZ5GVP <vcalandra@libero.it>



[Non-text portions of this message have been removed]


















[Non-text portions of this message have been removed]
7408 2012-04-14 10:10:42 Wes Re: Roy RX
Vincenzo, et al,

Drop me a note off-line and I'll send you electronic copies the original artwork. These are screen shot views of the ExpressPCB display. My email address is w7zoi [at] arrl dot net, all converted to the usual format.

73, Wes
w7zoi