EMRFD Message Archive 561
Message Date From Subject 561 2007-03-23 17:59:29 homsleyt DSP-10 PCB Does anyone have a bare board for the DSP-10?
Tom, N4WBS564 2007-03-23 21:21:15 Bob Larkin Re: DSP-10 PCB Hi Tom -
I believe W7SLB still has a small number of PCB:
http://members.aol.com/w7slb/w7slb.htm
The last that I heard, TAPR did not have any kits left. Sometimes a kit
shows up on the DSP-10 e-mail reflector (see URL on DSP-10 page
http://www.proaxis.com/~boblark/dsp10.htm for qth.net) Be sure you have
all the IC's and the variable inductors, if you go with the bare board. The
PLL's, for one, are hard to find.
Good luck,
Bob W7PUA
At 12:59 AM 3/24/2007 +0000, homsleyt wrote:
>Does anyone have a bare board for the DSP-10?
>
>Tom, N4WBS