EMRFD Message Archive 5374

Message Date From Subject
5374 2010-10-10 05:44:07 wa9cgz Funk amature magazine project

I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and maybe the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted. I have PayPal if that would help.

Thanks Joe wa9cgz

5377 2010-10-10 06:32:22 ehydra Re: Funk amature magazine project

I'm located in Germany. Where is the prob to buy it?

- Henry

--
ehydra.dyndns.info

wa9cgz schrieb:

> I need help from someone that can purchase PC boards for Funk
> projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I
> need help getting the circuit board and maybe the KT610 transistor,
> I'm not sure but the text may indicate that a 2N3866 could be
> substituted. I have PayPal if that would help.

5379 2010-10-10 11:45:53 victor Re: Funk amature magazine project

You can use one end of an open small fuse holder. It snaps
5380 2010-10-10 12:35:13 ehydra Re: Funk amature magazine project

I meant prob for problem not probe :-)

Interesting. I normally use a short copper wire wound to a coil. Or just
the original coil clip out of the probe package.

- Henry

--
ehydra.dyndns.info

victor schrieb:

> You can use one end of an open small fuse holder. It snaps
5381 2010-10-10 12:58:06 Alois Stöckl Re: Funk amature magazine project

Hi Henry,

selten so gelacht ;)

72 de Alois

> I meant prob for problem not probe :-)
>
> Interesting. I normally use a short copper wire wound to a coil. Or just
> the original coil clip out of the probe package.
>
> - Henry
>
> > You can use one end of an open small fuse holder. It snaps

5374	2010-10-10 05:44:07	wa9cgz	Funk amature magazine project
Message	Date	From	Subject
I need help from someone that can purchase PC boards for Funk projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I need help getting the circuit board and maybe the KT610 transistor, I'm not sure but the text may indicate that a 2N3866 could be substituted. I have PayPal if that would help. Thanks Joe wa9cgz
5377	2010-10-10 06:32:22	ehydra	Re: Funk amature magazine project
I'm located in Germany. Where is the prob to buy it? - Henry -- ehydra.dyndns.info wa9cgz schrieb: > I need help from someone that can purchase PC boards for Funk > projects. I would like to build the QRP linear by DL2EWN 1.8-150MHz I > need help getting the circuit board and maybe the KT610 transistor, > I'm not sure but the text may indicate that a 2N3866 could be > substituted. I have PayPal if that would help.
5379	2010-10-10 11:45:53	victor	Re: Funk amature magazine project
You can use one end of an open small fuse holder. It snaps
5380	2010-10-10 12:35:13	ehydra	Re: Funk amature magazine project
I meant prob for problem not probe :-) Interesting. I normally use a short copper wire wound to a coil. Or just the original coil clip out of the probe package. - Henry -- ehydra.dyndns.info victor schrieb: > You can use one end of an open small fuse holder. It snaps
5381	2010-10-10 12:58:06	Alois Stöckl	Re: Funk amature magazine project
Hi Henry, selten so gelacht ;) 72 de Alois > I meant prob for problem not probe :-) > > Interesting. I normally use a short copper wire wound to a coil. Or just > the original coil clip out of the probe package. > > - Henry > > > You can use one end of an open small fuse holder. It snaps