EMRFD Message Archive 3778

Message Date From Subject
3778 2009-11-16 07:47:43 ter753 LT5517 mixer

Guys, do a google for the above chip, it is rated at 40 mhz minimum but will work down to 3.5 or even lower.Would be very useful for a phasing type rig ect., best 73s, terry lynch EI3IZ.

3779 2009-11-17 08:52:12 richj_focus Re: LT5517 mixer

How do you know it will go so low in frequency?
The data sheet did not indicate it.

rich

3781 2009-11-17 14:41:07 Niels A. Moseley Re: LT5517 mixer

richj_focus wrote:

> How do you know it will go so low in frequency?
> The data sheet did not indicate it.
>
> rich

Hi Rich,

You can find a bit more information on the extended range here:
http://home.kpn.nl/rw.engberts/sdr_kth.htm

73,
Niels.

3778	2009-11-16 07:47:43	ter753	LT5517 mixer
Message	Date	From	Subject
Guys, do a google for the above chip, it is rated at 40 mhz minimum but will work down to 3.5 or even lower.Would be very useful for a phasing type rig ect., best 73s, terry lynch EI3IZ.
3779	2009-11-17 08:52:12	richj_focus	Re: LT5517 mixer
How do you know it will go so low in frequency? The data sheet did not indicate it. rich
3781	2009-11-17 14:41:07	Niels A. Moseley	Re: LT5517 mixer
richj_focus wrote: > How do you know it will go so low in frequency? > The data sheet did not indicate it. > > rich Hi Rich, You can find a bit more information on the extended range here: http://home.kpn.nl/rw.engberts/sdr_kth.htm 73, Niels.