EMRFD Message Archive 362

Message Date From Subject
362 2007-01-22 08:00:49 bkopski Ugly RCA connector method

Hi All,

Wes, W7ZOI, suggested this tidbit might find audience in this group.  An associated photo illustrates a  simple installation of an RCA female on a pcb base (happens to be a BITX 20M filter) made using Mouser cat # 161-4216 connector.  All that needed is to bend the mounting tabs flat and sweat solder them to the foil.  You can find related mating connector/cable information at http://users.easystreet.com/w7zoi/rca_plugs.html

I have assembled an entire transceiver comprised of ugly subassemblies interconnected using this method.

Bob, K3NHI