Message	Date	From	Subject
2667	2009-02-02 13:36:36	Dave - WB6DHW	9912 board schematic
The 9912 board schematic on my web site contained an error. The note on page 5 under R47 should read "Install R47 if PLL bypassed". The schematic indicated the opposite. If you install R47 and use the PLL, the PLL will not lock correctly. I have uploaded an updated schematic to the 9912 page. Dave - WB6DHW <http://wb6dhw.com>

The 9912 board schematic on my web site contained an error. The note
on page 5 under R47 should read "Install R47 if PLL bypassed". The
schematic indicated the opposite. If you install R47 and use the PLL,
the PLL will not lock correctly. I have uploaded an updated schematic
to the 9912 page.

Dave - WB6DHW
<http://wb6dhw.com>