EMRFD Message Archive 12962

Message Date From Subject
12962 2016-06-16 12:15:09 cqer01 ADE-1 Mixer Port Swaps

 I'm sure this has been covered but...can I swap the RF and IF ports in the ADE-1 or any other DBM without queer things happening?



12963 2016-06-16 12:17:37 Ashhar Farhan Re: ADE-1 Mixer Port Swaps
The IF port can go down to DC, the RF port bottoms out at 500 KHz. The IF to RF, RF to LO, LO to IF isolations are a bit different from each other. Read up the datasheet.

- f

12965 2016-06-16 16:14:12 cqer01 Re: ADE-1 Mixer Port Swaps
Thank you Ashhar