Message	Date	From	Subject
11593	2015-09-07 09:22:27	Ken Chase	Re: [Bulk] RE: [emrfd] BCI problems
Hi Dan When I experienced the problem with the analyzer, I started googling and came up with several stories of the same experience. The quick and dirty filter I used is http://www.qrpme.com/docs/BCI.pdf I had it together in an hour and already had an Altoids tins with BNC connectors. It works great with the analyzer. Give it a try. Now the challenge for me is to figure a filter for higher power. I have no idea where to begin. 73 Ken VA3ABN ----- Original Message -----

Hi Dan

When I experienced the problem with the analyzer, I started googling and came up with several stories of the same experience.

The quick and dirty filter I used is

I had it together in an hour and already had an Altoids tins with BNC connectors. It works great with the analyzer. Give it a try.

Now the challenge for me is to figure a filter for higher power. I have no idea where to begin.

Ken VA3ABN

----- Original Message -----