Message	Date	From	Subject
11270	2015-07-01 16:51:52	kg4rll@yahoo.com	Re: [emrfd] Measuring inductance
Hi All, I homebrewed this L/C meter some years ago and found it to work very well. "A surprisingly accurate digital L/C meter" by VK3BHR. It was my first project that uses a micro controller and it was quite a learning experience. After all learning is at least half of the fun! Works great for component matching. I verified the accuracy by measuring some 1% tolerance capacitors and it was spot on. Inductors were wound on various cores using the Amidon formula for whatever core I was using and then tested on the L/C meter. I found the meter to be accurate for measuring L also. Happy Homebrewing, Scott ----- Reply message -----

Hi All,

I homebrewed this L/C meter some years ago and found it to work very well.

"A surprisingly accurate digital L/C meter" by VK3BHR.

It was my first project that uses a micro controller and it was quite a learning experience.

After all learning is at least half of the fun!

Works great for component matching.

I verified the accuracy by measuring some 1% tolerance capacitors and it was spot on.

Inductors were wound on various cores using the Amidon formula for whatever core I was using and then tested on the L/C meter.

I found the meter to be accurate for measuring L also.

Happy Homebrewing,

Scott

----- Reply message -----