EMRFD Message Archive 3135

Message Date From Subject
3135 2009-05-27 09:30:16 ha5rxz Thank You
My 75 ohm amplifier block has been running since last night with a 0.30 V RMS signal at 14 MHz fed into the input. For the sake of safety the supply is 27.5 V rather than 28 V and this gives 1.9 watts into my dummy load.

Thank you to everyone who assisted.

HA5RXZ
5038 2010-09-04 02:19:28 ha5rxz Thank You
Ladies and Gentlemen, thank you

I have just spent ninety minutes reading a fascinating series of posts on PLL design. That such knowledge and experience is given away for free only shows the true advantage of Internet access.

73 to all contributors.

Peter Gant HA5RXZ